NEW CUSTOMER? USE CODE EXTRA2021 FOR 15% OFF YOUR FIRST ORDER! LIMITED TIME ONLY.
  • Home /
  • PERFORMANCE MESH S-COIL - MTL 1.2 Ohm (JAC Vapour) 4 Pack
S-Coil Mesh - 1.2Ohm
S-Coil Mesh - 1.2Ohm

Further information

  • ADDITIONAL INFORMATION
    • Filter by Coil Brand JAC Vapour
      Filter by Tank/Device S17 (JAC Vapour), S22 (JAC Vapour), SERIES-S (JAC Vapour), SERIES-S17 (JAC Vapour), SERIES-S22 (JAC Vapour), VIM
  • SAFETY INFORMATION

    • We take the safety of the items we sell very seriously. All of our products are regulated, tested and audited to meet UK and EU standards. Shopping with JAC means, you have peace of mind, that the hardware or E-liquids you are purchasing have been independently tested and verified as safe for use. More information on our safety and quality controls.

PERFORMANCE MESH S-COIL - MTL 1.2 Ohm (JAC Vapour) 4 Pack

Availability: In stock

£10.99

FREE DELIVERY on all UK orders over £40

4.1
10 Reviews 10
  • Description

    Suitable for use in our VIM, S17 and S22 tanks.


    Now sold as a pack of 4.


    What is a Mesh Coil?


    New! Introducing the Performance Mesh S-Coil, using the latest in mesh coil technology, our Performance Mesh S-Coils use a new layered organic cotton to increase the coil surface area. This provides the coil with the correct e liquid volume, without allowing flooding or leaking. This gives many benefits, including:

    • Rich, intense flavour
    • Dense vapour production
    • More consistent vape
    • Longer coil life
    • Suitable with all e liquid, including Nic Salts and High VG (up to 80%)

    Which Mesh S-Coil should I use?


    Need the technical bit? Here you go:

    • Vaping Coil Type - Mouth to Lung (MTL) 1.2Ohm coils.
    • Recommended wattage range - 10-16 W
    • Suitable for use with - VIM, S-17 and S-22 vapour tanks
    • This coil is designed for nic salts and MTL use to extend battery life and juice consumption.
  • Delivery

    Coronavirus Update

    Please note, due to the ongoing Covid-19 outbreak, Royal Mail are advising customers to be prepared for instances of disruption and delay in the network. While we are operating as normal and aim to ship your order as quickly as possible, we unfortunately have no control over localised postal delays and therefore advise customers to order in plenty of time to allow for such delays in service.

    Deliveries may arrive later than stated on the site, and outwith the usual delivery timescales. Unfortunately we will not be able to reimburse postage costs in such instances during this period, and the normal timescales that dictate when Royal Mail will consider a parcel as lost are suspended due to significant disruption in the postal network and at Customs in various territories around the world. We hope our customers understand that these are unprecedented times, and while we and Royal Mail aim to meet regular timescales they can’t be guaranteed.

    POPULAR TRACKED: (3 to 5 working days) *Delays possible

    RAPID TRACKED: (1 to 2 working days) *Delays possible

    STANDARD NON-TRACKED: (3 to 5 working days)*Delays possible

    ROYAL MAIL 1ST CLASS (NON-TRACKED): (1 to 2 working days)*Delays possible

    ROYAL MAIL 2ND CLASS (NON-TRACKED): (2 to 3 working days) *Delays possible

    Please note, orders placed after 1pm on Friday will ship Monday morning. We try to ship everything ordered before 1pm on the same day, however this is not always guaranteed.

    More info on UK and international deliveries

  • Returns

    Coronavirus Update 05/01

    For the next wee while, there will be one area where we shall have to make some changes to how we work, and that is our approach to customer returns.

    We’ll do our utmost to diagnose and troubleshoot problems remotely and ask for your assistance in providing photographs or videos to help to do so. This will ensure that where required we can continue to issue replacements. Should we need to get your device back for assessment or repair, due to the current lockdown regulations we will have to ask you to hold on to the item until we are allowed to return to head office.

    Any 14 day returns (due to a change of mind etc) will be authorised as normal, but please allow up to an additional week for these to be processed.

    None of this affects your statutory rights, or our 14 day no quibble returns policy, but we ask customers to be patient while we do our best to process things as quickly as possible.

    14 Day Money Back Guarantee and Warranty

    More information on our returns policy

Customer Reviews for the PERFORMANCE MESH S-COIL - MTL 1.2 Ohm (JAC Vapour) 4 Pack

  • Leaks AARGH! - by Chris, 2 December 2020
    3
    Nice smoke but like others, leaks a big problem even sometimes starting after a week or more use or straight after fitting new, very frustrating....................JAC Vapour: Please contact customer service as this is more likely an issue with the tank, they will replace the tank if need be.
  • Got these recently instead of previous ones, they seem to have a far less pull on them so using way more as not getting the hit I want.... - by Cath, 18 November 2020
    3
    Not sure.....JAC Vapour: The 1.2ohm are a smaller bore, so tighter draw as opposed to something like the 0.8ohm mesh, nearly all our devices also have adjustability of the airflow as well. If you wish more advice please contact customer service and they will explain the different things you can do, to get your required setting.
  • Leaked everywhere - by Robin, 28 June 2020
    1
    Just leaked everywhere upon filling.......JAC: The tank can only leak for a few reasons if it has been fine with other coils. Check the seal on the bottom of the coil and also make sure the coil does not need another quarter turn. If the issue still persists contact customer service and they will manage to sort or replace.
  • Wonderful improvements - by Robert, 12 June 2020
    5
    I waited until other reviews of these coils had been posted before trying.I can happily report the improvements have made me fall back in love with my s22 tank. Well done jac. Smooth vape no bubbling or spitting. Highly recommend.
  • Leakage - by MARK, 9 June 2020
    4
    Recently switched to these coils as the old ones Burt out too quickly. These now cause my ECiG to leak everytime I fill up. What's the solution please?.................JAC: Sorry you are having issues. The first thing to check is the tank seals etc are all fine. You can do this by, fitting the coil securely, fill up tank to juts below the window, replace the topcap on the tank securely, and leave to sit over night on a towel. The following applies: The tank does not drain, there is no issue with the tank, it's something to do with how it is being filled. The tank drains to the top of the coil, there is an issue with the coil chimney connection. The tank drains completely, it means there is an issue with one of the topfill thread seals, the coil thread seal or the integrity of the tank. IN this case check the o ring on the coil and the topcap. If both present it could be a crack in the glass that is unseen. The tank requires a seal to balance the pressure, so if you fill and leave the top off, the eliquid will flow through the cotton and out the airflow over a period of a few hours, all tanks rely on the seal pressure to prevent this happening, so never leave a full tank with the topcap off or loosened. I hope this helps, once you have this info, please contact CS service and they will be able to help.
  • Such an improvement - by Dan, 17 May 2020
    5
    These coils out perform and outlast the equivalent standard S-coils. They are so consistent and quick to prime and I’ve had no dry burnt hits. With the new batch sold as a pack of 4 it really will be a no brainer for me...........Glad you are enjoying them, we have the new stock coming in this week, so all will be replenished then in the 4 packs.
  • Got 8 weeks out the first coil! - by BRIAN, 28 April 2020
    5
    Very impressed with these, I've been using the same coil now for 8 weeks! I'ts only just starting to lose power now.
    Worth every penny!...........Glad you are enjoying them, we're ramping up production now, so we will be able to add better value to these in the future batches.
  • EARLY ACCESS* PERFORMANCE MESH S-COIL - MTL 1.2 Ohm - by Derek, 7 April 2020
    5
    Impressed, another well designed and engineered coil from JAK. I normally use 1.Ohm but so glad I tried these 1.2 Ohm MTL, 2 extra holes for wicking, larger bore at the top of the coil and a smaller contact at the bottom shows superb engineering. no clogging and great flavour, works extremely well in my wee Vim and Vim and a bonus is they last longer. Tried vent open with the Vim, no problem, I always have the vent closed and us a smaller mouth tip, still get the perfect draw for MTL. JAK is the only device that got me off cigarettes and its been 12 months. Thanks to all you lovely people at JAK, continued success for the future with all your products.
  • excellent - by Bryce, 4 March 2020
    5
    Got to say these are a marked improvement over the 1.5 coil, which was my goto. Yes these are more expensive, but I was going through a coil every 5 days with nicsalts on the 1.5, these however appear to last considerably longer, I am 10 days and counting on the first one., So despite the price increase I should get longer life from the pack, and hands down the coils is better taste and vapour.
  • Great coils - by Graham, 29 February 2020
    5
    Great coils. Nice, smooth vape, improved flavour and vapour production. Will buy again.

View all customer reviews Write a customer review

You could receive 20 Gold Points for writing a review and/or rating this product.