S22 TF Tank (Topfill)
Gurgles and spits juice. - by Justin, 16 January 2019
Decent, odd defect here and there. Would buy again. - by Gareth , 8 January 2019
Out of the 5, I have problems with 2 tanks with 1 being worse than the other. The main problem with 1 is that it leaks where the base and body of the tank screw together, not excessively but enough to be an annoyance, it has never been overtightened and the seals looks as good as all the others but there always seems to be slight wet spots around this joining point.
The other issue is pretty minor, the black tank is flaking so its looks tatty with bits of silver showing through here and there, I don't know why it's only happening to this one as I have 2 other black tanks and 2 green and they're all perfect, maybe the costing didn't quite take right to the body I don't know.
Overall though I'm happy with the tanks but the odd defect seems to slip through unnoticed. For the record, all are used indoors and haven't seen the gravel, I use my knackered old eleaf mod and kangtech tank for my travels.
The 510 drip tip adapter would be nice as standard in the package but it does keep costs down not being included so can see why it isn't.
Lastly, (and not really rank related) some juices could do with a narrower nozzle (like the short fill collection) as the tank opening is pretty slim to get the juice in.
With out question, I would buy more of these tanks in the future if required.
Impressive and then some! - by julian , 5 January 2019
The juni died the other day, so to the rescue came the S22, like a superhero with its supplied 1.00 coil....since this this point I've been kicking myself for not breaking it out sooner! as poppins would say " it's practically perfect in every way" it sits atop my kiya, looking fantasic (matching the black rubbery look of my mod) runs like a dream at just 12 watts, allowing me wayy past a full day's vaping , the top fill is so simple and faff free, I do wonder why others haven't attempted to copy it. I took 10 mins to really look at the thing while writing this, and of all the tanks I've come across, it really does shout quality, and clearly serious thought has gone into the making of it. I've had no issue at all with it's use for two weeks of daily use so far.
If I was too be very, VERY nit-picky about it's design, maybe the fill holes could be a tad bigger, or a brighter colour to show where the holes are, as under low light it's a tiny bit tricky to see where to stick the bottle nozzle to fill.
The viewing window on the front could use being slightly bigger and brighter possibly? (again having the inside a bright colour might help sort this)
I ran 1.50 coils before on my now dead tank, which I loved, so I'm very happy to see a 1.50ohm MTL coil for the S22 (I shall be trying them when funds allow) however the 1.00 is pretty dam amazing as is. (no leaks, or spit back) will be interesting to see how the two MTL coils may differ.
Last thing I'll say is, Jac vapours customer service is without doubt THE best I've ever come across! if you have a problem, or like me need a little advice, they will bend over backwards to help. if all customer service was this good, the world would be a better place for it.
Great Tank . Bulletproof - by Matthew, 5 December 2018
Great Tank But... - by Ian, 4 December 2018
Great tank - by Craig, 24 November 2018
Excellent - by lucinda, 6 September 2018
So Good I Bought the Company - well no but I have bought another ;-) - by Steve, 17 August 2018
As others have mentioned the tank can sometimes be difficult to remove from the mod, not often but when it happens it is a pain. I have had to take the tank reservoir off and grip the lower ring in a vice with leather-lined jaws before now but to be fair I have had this problem with a few tanks. I am sure that the issue is more inherent in the 510 coupling than the tank. Before reaching for the chainsaw try tightening first then try to undo this can sometimes break the friction on the thread.
I will finish with a tip. I have never had a dry burn with this tank but do get a slight singe when the tank is down to half. If this happens simply unscrew the filler lid and let some air in...no more singes!................JAC Vapour Ltd: Thanks for the review, another tip to prevent the tank sticking is a bit of eliquid on the base of the tank (not the 510 connector) and it won't lock up.
So easy to use! - by Mike, 25 July 2018
Great product - by andrew, 5 July 2018
You could receive 20 Gold Points for writing a review and/or rating this product.