Please note, due to their low resistance, these coils will not fire on an eGo style battery (such as our JAC 510). You will need a device capable of firing low-resistance coils. The 1.2Ohm coil, however, is ideal for use with our Series-E battery.
Replaceable low resistance bottom dual coils for Evod 2, Protank 3, Mini Protank 3 and Aero Tank.
PT3 coils are now available in 1.0Ohm and 1.2Ohm resistances, which means that they both will produce more heat and vapour. As the coils reach a higher temperature than the standard PT3 coils, it's recommended that they are used in a tank which offers good airflow (such as the Aero Tank). This is very important if the coils are being used at higher voltages.
A battery featuring an amp limit greater than 6A is necessary in order to use the 1.0Ohm coil safely through the standard voltage range of 3.7-4.8v. Any of our box or mech mods using one of our IMR batteries (18350, 18500, 18650 or 26650) will be able to fire this coil safely.
Each head is fitted with two coils and a short length of wicking material. Coils will typically last for around 10 fills of the tank on average before they will need to be replaced.
These V2 coils feature hidden wicks. This design hides the wicking material completely, which makes this design slightly less prone to leakage, though it does remove the ability to re-wick.